| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| PRECIOUS MATERIAL | GOLD |
| TERMINAL LENGTH | 0.250 INCHES MINIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND 300.0 MAXIMUM |
| SHAFT STYLE | ROUND |
| MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| SECTION QUANTITY | 1 |
| NONTURN DEVICE LOCATION | AT 4 OCLOCK AND AT 8 OCLOCK |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| BODY LENGTH | 0.781 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| MOUNTING BUSHING LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| SWITCH TYPE | PUSH-PULL |
| CUBIC MEASURE | 0.195 CUBIC INCHES |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| SWITCH VOLTAGE RATING IN VOLTS | 30.0 |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| SHAFT BEARING TYPE | SLEEVE |
| SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ACTUATOR TYPE | SINGLE SHAFT |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SHAFT LENGTH | 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 DC |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| TEST DATA DOCUMENT | 57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL |
| BODY HEIGHT | 0.500 INCHES NOMINAL |
| SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| MOUNTING METHOD | STANDARD BUSHING |
| BODY WIDTH | 0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION |