|
|
|
National Stock Number:
5905-01-324-0106
Federal Supply Class:
5905
National Item Identification Number:
013240106
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 913342-8 | 22525 | INSTRUMENTS AND FLIGHT RESEARCH INC. | | L04291 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | P49169 | 63743 | WARD LEONARD CT LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 280.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 340.0 | | BODY DIAMETER | 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | BODY LENGTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | CUBIC MEASURE | 0.528 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 25.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04291; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 340.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TERMINAL LENGTH | 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
|
|