|
|
|
National Stock Number:
5905-01-269-5123
Federal Supply Class:
5905
National Item Identification Number:
012695123
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-2236-00 | 80009 | TEKTRONIX, INC. | | 89300524 | F3880 | THALES AIR DEFENCE | | 89300524 | F8224 | THALES LAS FRANCE SAS | | GF06UT 20K | J6420 | TOKYO COSMOS ELECTRIC CO., LTD. | | GF06UT 20K | S4821 | TOKYO COSMOS ELECTRIC CO. LTD |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 0.287 INCHES MAXIMUM | | BODY LENGTH | 0.244 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CUBIC MEASURE | 0.016 CUBIC INCHES | | FEATURES PROVIDED | HUMIDITY PROOF | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | TERMINAL LENGTH | 0.300 INCHES NOMINAL | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 80009-311-2236-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|