|
|
National Stock Number: 5905-01-267-3929
Federal Supply Class: 5905
National Item Identification Number: 012673929
Description: RESISTOR,VARIABLE,NONWIRE WOUND,
Detail: A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
MIL-R-39035/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | RJR12FL105P | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL | SECTION QUANTITY | 1 | SHAFT STYLE | ROUND, SLOTTED | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | TEST DATA DOCUMENT | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | III CUBIC MEASURE | 0.075 CUBIC INCHES | BODY HEIGHT | 0.315 INCHES NOMINAL | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | BODY WIDTH | 0.190 INCHES NOMINAL | MOUNTING METHOD | UNTHREADED HOLE | ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS SINGLE SECTION | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 | SHAFT BEARING TYPE | SLEEVE | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | RELIABILITY INDICATOR | ESTABLISHED | ACTUATOR TYPE | SINGLE SHAFT | SHAFT LENGTH | 0.058 INCHES MAXIMUM | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | BODY LENGTH | 1.250 INCHES NOMINAL | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39035/1 GOVERNMENT SPECIFICATION | MOUNTING FACILITY QUANTITY | 2 | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | SHAFT DIAMETER | 0.115 INCHES NOMINAL | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
|
|