|
|
|
National Stock Number:
5905-01-221-8078
Federal Supply Class:
5905
National Item Identification Number:
012218078
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 5E4790/10-0001 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 100.000 KILOHMS HIGHEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 20.000 KILOHMS LOWEST RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.185 INCHES MAXIMUM | | BODY LENGTH | 0.796 INCHES MAXIMUM | | BODY WIDTH | 0.280 INCHES NOMINAL | | IDENTICAL VALUE RESISTOR QUANTITY | 4 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 4 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.050 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 EACH RESISTOR | | STYLE DESIGNATOR | DUAL INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 FIRST TEMP COEFFICIENT | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 TEMP RANGE OF FIRST TEMP COEFFICIENT | | TERMINAL LENGTH | 0.140 INCHES MINIMUM | | TERMINAL QUANTITY | 14 | | TERMINAL WIDTH | 0.014 INCHES MINIMUM AND 0.026 INCHES MAXIMUM | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 73030-5E4790/10 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 2.0 GRAMS |
|
|