| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3604.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| BODY LENGTH | 1.500 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| CUBIC MEASURE | 0.287 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| MOUNTING BUSHING LENGTH | 0.293 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| NONTURN DEVICE RADIUS | 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 1 |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT BEARING TYPE | SLEEVE |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-12934/31 GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |