|
|
|
National Stock Number:
5905-01-217-1623
Federal Supply Class:
5905
National Item Identification Number:
012171623
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 6010292-068 | 12436 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | MSP10A05-181/391G-S41 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 180.000 OHMS LOWEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 190.000 OHMS HIGHEST RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.195 INCHES MAXIMUM | | BODY LENGTH | 0.990 INCHES MAXIMUM | | BODY WIDTH | 0.090 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 8 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 8 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 1.700 TOTAL NETWORK | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | SPECIAL FEATURES | BURN IN REQUIRED | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 FIRST TEMP COEFFICIENT | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 TEMP RANGE OF FIRST TEMP COEFFICIENT | | TERMINAL LENGTH | 0.135 INCHES NOMINAL | | TERMINAL QUANTITY | 10 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 12436-6010292 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|