|
|
|
National Stock Number:
5905-01-216-5174
Federal Supply Class:
5905
National Item Identification Number:
012165174
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 2548669-0110 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 2548669-110 | 05347 | ULTRONIX INC | | 2548669-110 | 05591 | GENERAL RESISTANCE INC SUB OF PRIME TECHNOLOGY INC | | 2548669-110 | 0BHF9 | PRIME TECHNOLOGY LLC | | 2548669-110 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2548669-110 | 19587 | KELVIN INDUSTRIES INC | | T600 017 310 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 39.220 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | BODY HEIGHT | 0.160 INCHES MAXIMUM | | BODY LENGTH | 0.270 INCHES MAXIMUM | | BODY WIDTH | 0.270 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.125 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.150 TO 0.150 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 145.0 | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 10001-2548669 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|