|
|
|
National Stock Number:
5905-01-215-4253
Federal Supply Class:
5905
National Item Identification Number:
012154253
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 376-0509-010 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 376-0509-010 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 284.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.906 INCHES NOMINAL | | BODY WIDTH | 0.500 INCHES NOMINAL | | BODY STYLE | RECTANGULAR BUSHING MOUNTED | | CUBIC MEASURE | 0.227 CUBIC INCHES | | FEATURES PROVIDED | SWITCH | | OVERALL HEIGHT | 0.700 INCHES NOMINAL | | OVERALL LENGTH | 1.881 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 4.50 INCH-OUNCES | | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 8.0 | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING AND TAB | | OPERATING POSITION | ANY POSITION OF ROTATIONAL TRAVEL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.850 INCHES NOMINAL | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 DC | | SWITCH TYPE | PUSH-PULL | | SWITCH VOLTAGE RATING IN VOLTS | 30.0 | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 7 TURRET | | TEST DATA DOCUMENT | 13499-376-0509 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|