5905-01-212-7238 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-01-212-7240 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-212-7239

Federal Supply Class:
5905

National Item Identification Number:
012127239

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
14C1-308719176SERVO INSTRUMENT CORPORATION
70902-21906-10478286SIKORSKY AIRCRAFT CORPORATION
F0200806206880DATA INSTRUMENTS INC
RTS7/8-36306880DATA INSTRUMENTS INC
RTS7/8-36394603HONEYWELL SENSING & CONTROL


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION281.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION2.500 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER0.870 INCHES NOMINAL
BODY LENGTH0.390 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 SINGLE SECTION
LATERAL RUNOUT0.001 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM RUNNING TORQUE6.00 INCH-OUNCES
MAXIMUM STARTING TORQUE8.00 INCH-OUNCES
MAXIMUM STOP TORQUE128.00 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.5
MOUNTING BUSHING LENGTH0.380 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 12 OCLOCK
NONTURN DEVICE RADIUS0.359 INCHES NOMINAL
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT-5.0 TO 5.0 -65 DEG CELSIUS SINGLE SECTION AND -4.0 TO 4.0 -15 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 50 DEG CELSIUS SINGLE SECTION AND -5.0 TO 5.0 75 DEG CELSIUS SINGLE SECTION AND -5.0 TO 5.0 105 DEG CELSIUS SINGLE SECTION AND -5.0 TO 5.0 125 DEG CELSIUS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG285.0 NOMINAL
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT END PLAY0.00500 INCHES
SHAFT DIAMETER0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SHAFT LENGTH0.868 INCHES NOMINAL
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TURRET
TEST DATA DOCUMENT78286-70902-21906 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us