| ELECTRICAL RESISTANCE | 1.150 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 2.300 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 100.000 OHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 49.400 KILOHMS 4TH INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 500.000 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 9.840 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 85.0 |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| BODY LENGTH | 0.870 INCHES MAXIMUM |
| BODY WIDTH | 0.260 INCHES MAXIMUM |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 4TH INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 3 LOWEST RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| RESISTANCE TOLERANCE IN PERCENT | -0.500 TO 0.500 EACH RESISTOR |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYLE DESIGNATOR | DUAL INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 FIRST TEMP COEFFICIENT |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 85.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM |
| TERMINAL QUANTITY | 16 |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TERMINAL WIDTH | 0.018 INCHES NOMINAL |
| TEST DATA DOCUMENT | 14304-10085-5610 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |