|
|
|
National Stock Number:
5905-01-208-4748
Federal Supply Class:
5905
National Item Identification Number:
012084748
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 5043CX3E300J | 19701 | NORTH AMERICAN PHILIPS CORP PHILIPS COMPONENTS DISCRETE PRODUCTS DIV | | 5043CX3R300J | 19701 | NORTH AMERICAN PHILIPS CORP PHILIPS COMPONENTS DISCRETE PRODUCTS DIV | | CF07-3R30J | 78488 | STACKPOLE CORP THE | | ERD25TJ3R3 | 54473 | MATSUSHITA ELECTRIC CORP OF AMERICA M/S 7H-4 | | OK33G5 | 44655 | OHMITE HOLDING, L.L.C. | | R25J-S03E3 | 57768 | PROCESS AUTOMATION CO | | R65-0003-339 | 14304 | L3HARRIS TECHNOLOGIES, INC. | | R65-0003-339 | 54869 | PIHER INTL CORP | | SMA0207-3R30G | 91637 | VISHAY DALE ELECTRONICS, LLC | | SSB3R300J | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 3.300 OHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 130.0 | | BODY DIAMETER | 0.100 INCHES MAXIMUM | | BODY LENGTH | 0.250 INCHES NOMINAL | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR | | PROPRIETARY CHARACTERISTICS | PACS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -300.0 TO 300.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 14304-R65-0003 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 0.300 GRAMS |
|
|