|
|
|
National Stock Number:
5905-01-205-1707
Federal Supply Class:
5905
National Item Identification Number:
012051707
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 2903002-119 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2903002-24 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2903002-24 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 581170-24 | 3B150 | RAYTHEON COMPANY | | 581170-24 | 49956 | RAYTHEON COMPANY | | 581170-24 | 54X10 | RAYTHEON COMPANY | | MK132-5600F | 19647 | CADDOCK ELECTRONICS INC. | | MK132-5600J | 19647 | CADDOCK ELECTRONICS INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 560.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | BODY WIDTH | 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.750 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -15.0 TO 105.0 | | TERMINAL LENGTH | 1.500 INCHES MINIMUM AND 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 10001-2903002 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNPACKAGED UNIT WEIGHT | 1.3 GRAMS |
|
|