|
|
|
National Stock Number:
5905-01-203-8328
Federal Supply Class:
5905
National Item Identification Number:
012038328
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 228061P3 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 2720-2208-33 | 44655 | OHMITE HOLDING, L.L.C. | | 2720-2208-33 | 63060 | HEICO OHMITE LLC DBA OHMITE MFG CO INC | | SM208RD-03 | 44655 | OHMITE HOLDING, L.L.C. | | SM208RD-03 | 63060 | HEICO OHMITE LLC DBA OHMITE MFG CO INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 30.000 MEGOHMS EACH RESISTOR | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.600 INCHES MAXIMUM | | BODY LENGTH | 2.000 INCHES MAXIMUM | | BODY WIDTH | 0.150 INCHES MAXIMUM | | CUBIC MEASURE | 0.180 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 2 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 4.930 TOTAL NETWORK | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 EACH RESISTOR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 175.0 | | TERMINAL LENGTH | 4.000 INCHES MINIMUM | | TERMINAL QUANTITY | 3 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 94117-228061 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|