| ELECTRICAL RESISTANCE | 28.284 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 20.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 84.853 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 9.756 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 5.000 KILOHMS LOWEST RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY HEIGHT | 0.150 INCHES MAXIMUM |
| BODY LENGTH | 0.992 INCHES NOMINAL |
| BODY WIDTH | 0.490 INCHES NOMINAL |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 LOWEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 3 HIGHEST RESISTANCE VALUE |
| INCLOSURE METHOD | HERMETICALLY SEALED |
| POWER DISSIPATION RATING IN WATTS | 0.080 TOTAL NETWORK |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -0.010 TO 0.010 EACH RESISTOR |
| SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY |
| STYLE DESIGNATOR | DUAL INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| TERMINAL LENGTH | 0.275 INCHES MAXIMUM |
| TERMINAL QUANTITY | 18 |
| TERMINAL WIDTH | 0.018 INCHES NOMINAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 55974-6405293 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |