|
|
|
National Stock Number:
5905-01-201-9116
Federal Supply Class:
5905
National Item Identification Number:
012019116
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| JJCS99631 | 01121 | ROCKWELL AUTOMATION, INC. | | JJCS99631 | 0N439 | LINTECH COMPONENTS CO. INC. | | JJCS99631 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 292.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS ALL SECTIONS | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | DUAL CONCENTRIC | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS | | BODY DIAMETER | 1.156 INCHES MAXIMUM | | BODY LENGTH | 1.542 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CUBIC MEASURE | 3.329 CUBIC INCHES | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | FEATURES PROVIDED | SWITCH | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 21.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 192.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 3.0 | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | OPERATING POSITION | START OF ROTATION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR 1ST SECTION AND 1.49 FREE AIR 2ND SECTION | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 5.5 -55 DEG CELSIUS ALL SECTIONS AND +0.0 TO 3.0 -25 DEG CELSIUS ALL SECTIONS AND +0.0 TO 1.5 0 DEG CELSIUS ALL SECTIONS AND -2.0 TO 2.0 85 DEG CELSIUS ALL SECTIONS AND +0.0 TO 4.5 120 DEG CELSIUS ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 312.0 MINIMUM AND 333.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 1.156 INCHES NOMINAL | | SHAFT STYLE | ROUND, STEPPED | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC AND 10.000 DC | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 125.0 AND 10.0 | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG | | UNDERCUT DIAMETER | 0.406 INCHES NOMINAL | | UNDERCUT LENGTH | 0.125 INCHES NOMINAL |
|
|