EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS ALL SECTIONS |
ACTUATOR TYPE | SINGLE SHAFT |
ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
BODY DIAMETER | 1.453 INCHES MAXIMUM |
BODY LENGTH | 1.800 INCHES MAXIMUM |
BODY STYLE | CYLINDRICAL SERVO MOUNTED |
FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 1ST SECTION |
FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 2ND SECTION |
LATERAL RUNOUT | 0.002 INCHES |
MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
MAXIMUM RUNNING TORQUE | 0.70 INCH-OUNCES |
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.041 |
MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL |
MOUNTING METHOD | CLAMP RING |
SPECIAL FEATURES | 50KILOHM LOAD RESISTOR ON SECOND SECTION WIPER |
PILOT LENGTH | 0.1320 INCHES NOMINAL |
PILOT DIAMETER RUNOUT | 0.00100 INCHES |
PILOT DIAMETER | 1.3120 INCHES NOMINAL |
POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -5.0 TO 5.0 -65 DEG CELSIUS ALL SECTIONS AND -4.0 TO 4.0 -15 DEG CELSIUS ALL SECTIONS AND -2.5 TO 2.5 50 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 75 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 105 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 125 DEG CELSIUS ALL SECTIONS |
RELIABILITY INDICATOR | NOT ESTABLISHED |
RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
SECTION QUANTITY | 2 |
SHAFT BEARING TYPE | BALL |
SHAFT END PLAY | 0.00500 INCHES |
SHAFT DIAMETER | 0.125 INCHES MAXIMUM |
SHAFT RADIAL PLAY | 0.001 INCHES |
SHAFT RUNOUT | 0.001 INCHES |
SHAFT STYLE | ROUND |
SHAFT LENGTH | 0.672 INCHES NOMINAL |
UNDERCUT DIAMETER | 1.315 INCHES MAXIMUM |
UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 1ST SECTION |
TAP LOCATION TOLERANCE PER SECTION | -250.0 TO 250.0 OHMS 1ST SECTION |
TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
TERMINAL TYPE AND QUANTITY | 7 TURRET |
TEST DATA DOCUMENT | 03538-7648736 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |