1005-01-164-3416 BLADDER,ACCUMULATOR,HYDRAULIC Index 5340-01-164-3418 INACTIVE

National Stock Number:
5905-01-164-3417

Federal Supply Class:
5905

National Item Identification Number:
011643417

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
128-009702111VISHAY SPRAGUE INC
17C1-248719176SERVO INSTRUMENT CORPORATION
50772222978MEASUREMENT SYSTEMS INC
ER-588-3322978MEASUREMENT SYSTEMS INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION54.0 MINIMUM AND 57.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM
BODY LENGTH0.650 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDHUMIDITY PROOF
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
III CUBIC MEASURE0.581 CUBIC INCHES
III FRAGILITY FACTORMODERATELY RUGGED
PILOT DIAMETER0.8690 INCHES MINIMUM AND 0.8790 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
MAXIMUM STARTING TORQUE1.00 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG54.0 MINIMUM AND 57.0 MAXIMUM
SECTION QUANTITY1
SHAFT BEARING TYPEBEARING
SHAFT DIAMETER0.1239 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM
SHAFT LENGTH0.438 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS2500.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-250.0 TO 250.0 OHMS SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-350.0 TO 350.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY4 TAB, SOLDER LUG
UNDERCUT DIAMETER0.963 INCHES MINIMUM AND 0.973 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us