5360-01-161-6174 SPRING,FLAT Index 5306-01-161-6177 BOLT,ASSEMBLEDWASHER

National Stock Number:
5905-01-161-6176

Federal Supply Class:
5905

National Item Identification Number:
011616176

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
3178149-610001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
9943801121ROCKWELL AUTOMATION, INC.
KK1205-635627PRECISION ELECTRONICS CORPORATION


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION2.500 KILOHMS ALL SECTIONS
ACTUATOR TYPEDUAL CONCENTRIC
BODY HEIGHT1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
BODY LENGTH1.359 INCHES NOMINAL
BODY STYLERECTANGULAR W/BUSHING
BODY WIDTH1.156 INCHES NOMINAL
MOUNTING BUSHING LENGTH1.500 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY2
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SHAFT LENGTH1.219 INCHES NOMINAL
SHAFT STYLEROUND, STEPPED
SPECIAL FEATURESBOTH SHAFTS GROUND FLAT
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY6 TAB, SOLDER LUG
UNDERCUT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
UNDERCUT LENGTH0.219 INCHES NOMINAL


Click here to Register for Free 30-day Trial