|
|
|
National Stock Number:
5905-01-158-4993
Federal Supply Class:
5905
National Item Identification Number:
011584993
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| GR815DJ10001A03 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HA412-P10K 0HMSP | 18612 | VISHAY INTERTECHNOLOGY, INC. | | HA412P-10001A-1PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. | | VHA412P10001A1PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. | | VHA412P10K00A1PPM | 18612 | VISHAY INTERTECHNOLOGY, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY DIAMETER | 0.375 INCHES NOMINAL | | BODY LENGTH | 0.625 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.050 TO 0.050 | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1.0 TO 1.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +0.0 TO 60.0 | | TERMINAL LENGTH | 1.250 INCHES MINIMUM AND 2.500 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 26512-GR815DJ DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|