|
|
|
National Stock Number:
5905-01-158-2306
Federal Supply Class:
5905
National Item Identification Number:
011582306
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
|
Manufacturer Information:
| 4130390-00 | 34257 | EIP MICROWAVE INC | | C2502-50-3200F | 81755 | LOCKHEED MARTIN CORPORATION | | HG-50 320 OHMS 1PCT | 91637 | VISHAY DALE ELECTRONICS, LLC | | HG50-3200F | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 320.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY HEIGHT | 0.604 INCHES NOMINAL | | BODY LENGTH | 1.968 INCHES NOMINAL | | BODY WIDTH | 0.630 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.563 INCHES NOMINAL | | HEAT SINK LENGTH | 7.000 INCHES | | HEAT SINK THICKNESS | 0.040 INCHES | | HEAT SINK WIDTH | 5.000 INCHES | | INCLOSURE TYPE | ENCASED | | MATERIAL | ALUMINUM ALLOY HEAT SINK | | MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL | | POWER DISSIPATION RATING IN WATTS | 50.000 HEAT SINK | | REACTANCE CHARACTERISTIC | INDUCTIVE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL (S) | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 | | TERMINAL LENGTH | 0.407 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81755-C2502 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|