| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 75.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM |
| BODY LENGTH | 1.510 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CUBIC MEASURE | 1.573 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIXED TAP QUANTITY PER SECTION | 2 ALL SECTIONS |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TANGENTIAL PORM 75 DEG |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS |
| LATERAL RUNOUT | 0.001 INCHES |
| MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 0.40 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 |
| MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.4320 INCHES MINIMUM AND 1.4420 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT BEARING TYPE | SLEEVE |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT LENGTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE TERMINAL NOT ELECTRICALLY CONNECTED |
| UNDERCUT DIAMETER | 1.280 INCHES MINIMUM AND 1.290 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0680 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 170.0 ALL SECTIONS |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 10 TURRET |
| TEST DATA DOCUMENT | 03956-1803993 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |