|
|
|
National Stock Number:
5905-01-060-2189
Federal Supply Class:
5905
National Item Identification Number:
010602189
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 116-FL1-233 | 08815 | HONEYWELL INTERNATIONAL INC | | 116-FLT-233 | 08815 | HONEYWELL INTERNATIONAL INC | | 662160-3 | 59364 | HONEYWELL INTERNATIONAL INC. | | 662160-3 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.080 INCHES MINIMUM AND 1.110 INCHES MAXIMUM | | BODY LENGTH | 0.635 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | MAXIMUM STARTING TORQUE | 0.20 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.05000 INCHES MINIMUM AND 0.70000 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.08000 INCHES MINIMUM AND 1.11000 INCHES MAXIMUM | | MOUNTING METHOD | FLANGE | | PILOT LENGTH | 0.03000 INCHES MINIMUM AND 0.50000 INCHES MAXIMUM | | PILOT DIAMETER | 1.02900 INCHES MINIMUM AND 1.03000 INCHES MAXIMUM | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | UNDERCUT DIAMETER | 1.029 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.05000 INCHES MINIMUM AND 0.70000 INCHES MAXIMUM |
|
|