|
|
|
National Stock Number:
5905-01-041-3572
Federal Supply Class:
5905
National Item Identification Number:
010413572
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 2187-17-100KP0RM10PCT | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 0.312 INCHES NOMINAL | | BODY LENGTH | 1.250 INCHES NOMINAL | | BODY WIDTH | 0.280 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.088 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | SHAFT LENGTH | 0.062 INCHES NOMINAL | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL LENGTH | 0.500 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|