|
|
National Stock Number: 5905-01-040-4005
Federal Supply Class: 5905
National Item Identification Number: 010404005
Description: RESISTOR,VARIABLE,WIRE WOUND,NON
Detail: A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
MILR39015-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | RTR22DX101M | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 16200.0 MAXIMUM | ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | ACTUATOR TYPE | SINGLE SHAFT | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | BODY HEIGHT | 0.515 INCHES NOMINAL | BODY LENGTH | 0.500 INCHES NOMINAL | BODY WIDTH | 0.205 INCHES NOMINAL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | FRAGILITY FACTOR | MODERATELY DELICATE | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL | MOUNTING FACILITY QUANTITY | 2 | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL | MOUNTING METHOD | UNTHREADED HOLE | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 | RELIABILITY INDICATOR | ESTABLISHED | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -0.5 TO 0.5 SINGLE SECTION | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 16200.0 MAXIMUM | SECTION QUANTITY | 1 | SHAFT LENGTH | 0.045 INCHES MAXIMUM | SHAFT DIAMETER | 0.060 INCHES NOMINAL | SHAFT STYLE | ROUND, SLOTTED | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/2 GOVERNMENT SPECIFICATION | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | TERMINAL LENGTH | 0.172 INCHES MINIMUM | TERMINAL TYPE AND QUANTITY | 3 PIN | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|