6740-01-040-3201 FITTING,PIVOT Index 5905-01-040-3203 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5905-01-040-3202

Federal Supply Class:
5905

National Item Identification Number:
010403202

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
3215915-028-10399696LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN SYSTEMS & GLOBAL SOLUTIONS


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER0.875 NOMINAL INCHES
BODY LENGTH0.812 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTION7 OCLOCK ALL PRIMARIES
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50/+0.50 SINGLE SECTION
OVERALL DIAMETER1.312 INCHES MAXIMUM
OVERALL LENGTH1.343 INCHES MAXIMUM
LATERAL RUNOUT0.002 INCHES
MAXIMUM RUNNING TORQUE0.25 INCH-OUNCES
MAXIMUM STARTING TORQUE0.30 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.25
MOUNTING METHODCLAMP RING
MOUNTING LIP DEPTH0.0620 NOMINAL INCHES
MOUNTING LIP DIAMETER0.8750 INCHES NOMINAL
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT BEARING TYPEBALL
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT RADIAL PLAY0.002 INCHES
SHAFT LENGTH0.500 INCHES NOMINAL
SHAFT RUNOUT0.002 INCHES
SHAFT STYLEROUND
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER0.7500 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.25 7TH SECONDARY QUALITY
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0/+3.0 SINGLE SECTION
SPECIAL FEATURESPOTENTIOMETER EQUIPPED WITH GEAR 24T,96DP,20 DEG P.A. PIC DESIGN P/N G29-24 MOUNTED ON SHAFT AND PIN,SPIROL .041 DIA X .025 LG P/N C5-13 THRU HUB AND SHAFT
UNDERCUT DIAMETER0.781 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0/+100.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TURRET


Click here to Register for Free 30-day Trial