|
|
|
National Stock Number:
5905-01-038-0651
Federal Supply Class:
5905
National Item Identification Number:
010380651
Description:
RESISTOR NETWORK,FIXED,WIRE WOUN
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of high resistance wire (or ribbon), usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 2643-PN-3 | 19587 | KELVIN INDUSTRIES INC | | 521-001-9101 | 64547 | HONEYWELL INTERNATIONAL, INC | | N-160A | 22045 | JORDAN ELECTRIC CO DIV OF GRO-CON | | RN2692B | 50843 | IMPERIAL ASTRONICS |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 OHMS LOWEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 13.333 KILOHMS HIGHEST RESISTANCE VALUE | | ELECTRICAL RESISTANCE | 700.000 OHMS INTERMEDIATE RESISTANCE VALUE | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | BODY HEIGHT | 0.350 INCHES MAXIMUM | | BODY LENGTH | 0.575 INCHES NOMINAL | | BODY WIDTH | 0.575 INCHES NOMINAL | | IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 1 INTERMEDIATE RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.250 EACH RESISTOR | | RESISTANCE TOLERANCE IN PERCENT | -0.050 TO 0.050 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | DUAL INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -10.0 TO 10.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 145.0 | | TERMINAL LENGTH | 0.720 INCHES MINIMUM | | TERMINAL QUANTITY | 8 | | TERMINAL TYPE | PIN | | TEST DATA DOCUMENT | 70210-521-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|