5905-01-032-6433 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-01-032-6436 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-032-6435

Federal Supply Class:
5905

National Item Identification Number:
010326435

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2445950-604454SENSOR SYSTEMS, L.L.C.
2445950-619315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
2445950-625413ES BETA, INC
2445950-655972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
2445950-696774HONEYWELL INTERNATIONAL INC.
CP118H-5-203929CARTER MANUFACTURING CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION345.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION2.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY DIAMETER0.875 INCHES NOMINAL
BODY LENGTH0.410 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDHUMIDITY PROOF
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION GRAPH
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION ABSOLUTE CONFORMITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.002/+0.002 SINGLE SECTION
PILOT DIAMETER0.7500 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM RUNNING TORQUE0.20 INCH-OUNCES
MAXIMUM STARTING TORQUE0.25 INCH-OUNCES
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER0.8750 INCHES NOMINAL
MOUNTING METHODCLAMP RING
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0/+5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT LENGTH0.320 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
SPECIAL FEATURESSHAFT ROTATION IS CLOCKWISE
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-200.0/+200.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TURRET
TEST DATA DOCUMENT19315-2445950 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER0.750 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL


Click here to Register for Free 30-day Trial