| ELECTRICAL RESISTANCE | 1.000 KILOHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 15.400 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 18.000 KILOHMS 4TH INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 3.400 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 3.920 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY DIAMETER | 0.030 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| BODY LENGTH | 0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CUBIC MEASURE | 0.049 CUBIC INCHES |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 2ND INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 3 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 3 LOWEST RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 1.500 TOTAL NETWORK |
| RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 LOWEST RESISTANCE VALUE |
| RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 HIGHEST RESISTANCE VALUE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK |
| STYLE DESIGNATOR | DUAL INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 FIRST TEMP COEFFICIENT |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SECOND TEMP COEFFICIENT |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +0.0 TO 125.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| TERMINAL QUANTITY | 14 |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TERMINAL WIDTH | 0.014 INCHES MINIMUM AND 0.024 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 87990-755090A0031 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |