|
|
|
National Stock Number:
5905-01-022-5062
Federal Supply Class:
5905
National Item Identification Number:
010225062
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 11200006-7 | 34860 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 247AS-C1520-001 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 302-00001-16 | 95266 | OECO, LLC | | MD1912-7 | 19647 | CADDOCK ELECTRONICS INC. | | MG660-10MEG1 | 19647 | CADDOCK ELECTRONICS INC. | | MG660-10MEGP0RM1 | 19647 | CADDOCK ELECTRONICS INC. | | MG660-10MEGPORM1PCT | 19647 | CADDOCK ELECTRONICS INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 10.000 MEGOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 225.0 | | BODY DIAMETER | 0.094 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.600 FREE AIR | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | RELIABILITY INDICATOR | ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -80.0 TO 80.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -15.0 TO 105.0 | | TERMINAL LENGTH | 1.500 INCHES NOMINAL | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 30003-247AS-C1520 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|