|
|
|
National Stock Number:
5905-01-021-1001
Federal Supply Class:
5905
National Item Identification Number:
010211001
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| MILR22097-4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RJ24FP105 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 0.425 INCHES MAXIMUM | | BODY WIDTH | 0.195 INCHES NOMINAL | | BODY HEIGHT | 0.375 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.075 INCHES NOMINAL | | SHAFT LENGTH | 0.080 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND | | 10800.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND | | 10800.0 MAXIMUM | | MOUNTING METHOD | TERMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | TERMINAL LENGTH | 0.172 INCHES MINIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/4 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILR22097-4 | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | RJ24FP105 |
|
|