| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 180.0 MINIMUM AND 220.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS ALL SECTIONS |
| ACTUATOR TRAVEL CONTROL FEATURE | SPRING |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 60.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 1.120 INCHES MAXIMUM |
| BODY LENGTH | 1.265 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| FEATURES PROVIDED | SWITCH |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 1.370 INCHES MAXIMUM |
| OVERALL LENGTH | 2.047 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 15.00 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| MOUNTING BUSHING LENGTH | 0.380 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING AND CLAMP RING |
| NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| NONTURN DEVICE RADIUS | 0.437 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 180.0 MINIMUM AND 220.0 MAXIMUM |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SECTION QUANTITY | 2 |
| SHAFT BEARING TYPE | BEARING |
| SHAFT LENGTH | 0.370 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT END PLAY | 0.001 INCHES |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 DC |
| SWITCH OPERATING POSITION | START OF ROTATION |
| SWITCH TYPE | ROTARY |
| SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1000.0 ALL SECTIONS |
| TAP LOCATION TOLERANCE PER SECTION | -10.0 TO 10.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TURRET |
| TEST DATA DOCUMENT | 10001-2890904 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |