|
|
|
National Stock Number:
5905-01-018-4506
Federal Supply Class:
5905
National Item Identification Number:
010184506
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 101A-52-3OHMSPORM0-5PCT | 05347 | ULTRONIX INC | | 1489231-0091 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 1489231-0091 | 96774 | HONEYWELL INTERNATIONAL INC. | | 7006-52-30HMSP0R | 54294 | SHALLCROSS INC | | 7006-52-3OHMSPORM0-5PCT | 52494 | WHITE CONSOLIDATED INDUSTRIES INC UNIVERSAL NOLIN DIV | | WWA13X000B52R30D | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 52.300 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 | | BODY DIAMETER | 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | BODY LENGTH | 0.230 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.125 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.500 TO 0.500 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -20.0 TO 20.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0 TO 145.0 | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 02987-1489231 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|