5905-01-016-9235 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5920-01-016-9237 FUSE,CARTRIDGE

National Stock Number:
5905-01-016-9236

Federal Supply Class:
5905

National Item Identification Number:
010169236

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
10275431-118876U S ARMY AVIATION AND MISSILE COMMAND
1202Y200PORM5PCT18612VISHAY INTERTECHNOLOGY, INC.


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION200.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.325 INCHES NOMINAL
BODY LENGTH1.250 INCHES NOMINAL
BODY WIDTH0.195 INCHES NOMINAL
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.300 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.700 INCHES NOMINAL
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 SINGLE SECTION
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.000 INCHES NOMINAL
OVERALL HEIGHT0.825 INCHES NOMINAL
OVERALL LENGTH1.320 INCHES NOMINAL
OVERALL WIDTH0.195 INCHES NOMINAL
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.093 INCHES NOMINAL
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT LENGTH0.070 INCHES NOMINAL
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-10.0 TO 10.0 SINGLE SECTION
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH0.500 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial