5905-01-016-2357 RESISTOR,FIXED,FILM Index 5905-01-016-2359 RESISTOR,FIXED,FILM

National Stock Number:
5905-01-016-2358

Federal Supply Class:
5905

National Item Identification Number:
010162358

Description:
RESISTOR,FIXED,FILM

Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.


Manufacturer Information:
MIL-PRF-55182/781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-55182/781349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RNC50H5402BS81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE54.000 KILOHMS
AMBIENT TEMP AT FULL RATED POWER125.0 CELSIUS
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER175.0
BODY DIAMETER0.050 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
BODY LENGTH0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
INCLOSURE TYPEENCAPSULATED
MIL-STD-1276 WIRE LEAD TYPE DESIGNATORC
POWER DISSIPATION RATING IN WATTS0.050 FREE AIR
RESISTANCE TOLERANCE IN PERCENT-0.100 TO 0.100
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.001
RELIABILITY INDICATORESTABLISHED
UNPACKAGED UNIT WEIGHT0.11 GRAMS
SPECIFICATION/STANDARD DATA81349-MIL-R-55182/7 GOVERNMENT SPECIFICATION
STYLE DESIGNATORAXIAL TERMINAL EACH END
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-50.0 TO 50.0
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 175.0
TERMINAL LENGTH0.984 INCHES MINIMUM AND 1.516 INCHES MAXIMUM
TERMINAL TYPEWIRE LEAD
TEST DATA DOCUMENT81349-MIL-R-55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial