5905-01-016-0032 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-01-016-0034 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-01-016-0033

Federal Supply Class:
5905

National Item Identification Number:
010160033

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
2995143-610001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
50-1-11-501P02111VISHAY SPRAGUE INC
50-1-11-501PC7407IV-ELECTRONIC KLAUS VESPERMANN KG


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION6480.0 MINIMUM AND 10080.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS AND CLUTCH
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM
BODY LENGTH0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM
BODY WIDTH0.313 INCHES MINIMUM AND 0.343 INCHES MAXIMUM
BODY STYLERECTANGULAR W/BUSHING/SLOT MOUNTED
CUBIC MEASURE0.047 CUBIC INCHES
FEATURES PROVIDEDHUMIDITY PROOF
FRAGILITY FACTORMODERATELY RUGGED
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
MAXIMUM STARTING TORQUE5.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING AND UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.75 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG6480.0 MINIMUM AND 10080.0 MAXIMUM
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.190 INCHES NOMINAL
SECTION QUANTITY1
SHAFT BEARING TYPESLEEVE
SHAFT LENGTH0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
SHAFT DIAMETER0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SPECIAL FEATURESSEALED TO PERMIT CLEANING IN COMMON SOLVENTS
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LEAD


Click here to Register for Free 30-day Trial