5905-01-015-8128 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-01-015-8130 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-01-015-8129

Federal Supply Class:
5905

National Item Identification Number:
010158129

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
ET50X20219701NORTH AMERICAN PHILIPS CORP PHILIPS COMPONENTS DISCRETE PRODUCTS DIV
ET50X20230983MEPCOPAL CO A JOINT VENTURE


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
ACTUATOR TYPEFLUSH DRIVE WITH SLOT-HOLE
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.320 INCHES NOMINAL
BODY LENGTH0.215 INCHES NOMINAL
BODY WIDTH0.250 INCHES NOMINAL
BODY STYLERECTANGULAR
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.100 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.200 INCHES NOMINAL
OVERALL HEIGHT0.320 INCHES NOMINAL
OVERALL LENGTH0.520 INCHES NOMINAL
OVERALL WIDTH0.250 INCHES NOMINAL
MOUNTING METHODTERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
SECTION QUANTITY1
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
TERMINAL LENGTH0.200 INCHES NOMINAL
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial