5905-01-014-4760, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-014-4759 RESISTOR,VARIABLE,NONWIRE WOUND,

5905-01-014-4761 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-014-4760

Federal Supply Class:
5905

National Item Identification Number:
010144760

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

380-1080-430	13499	ROCKWELL COLLINS, INC.
MIL-R-39035/2	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJR24FX502P	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	5400.0 MINIMUM AND 10800.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
BODY LENGTH	0.415 INCHES MINIMUM AND 0.420 INCHES MAXIMUM
BODY STYLE	RECTANGULAR
BODY WIDTH	0.145 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
OVERALL HEIGHT	0.435 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
OVERALL LENGTH	0.715 INCHES MINIMUM AND 0.725 INCHES MAXIMUM
OVERALL WIDTH	0.145 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.100
RELIABILITY INDICATOR	ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	5400.0 MINIMUM AND 10800.0 MAXIMUM
SECTION QUANTITY	1
SHAFT BEARING TYPE	SLEEVE
SHAFT DIAMETER	0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
SHAFT LENGTH	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-39035/2 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-100.0 TO 100.0 SINGLE SECTION
TERMINAL LENGTH	0.300 INCHES MINIMUM AND 0.305 INCHES MAXIMUM
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial