|
|
|
National Stock Number:
5905-01-008-6214
Federal Supply Class:
5905
National Item Identification Number:
010086214
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 273S1-501M | 32997 | BOURNS INC | | 273S1-501M | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | BODY HEIGHT | 0.320 INCHES NOMINAL | | BODY LENGTH | 1.250 INCHES NOMINAL | | BODY WIDTH | 0.280 INCHES NOMINAL | | BODY STYLE | RECTANGULAR | | FEATURES PROVIDED | PANEL SEAL | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | SCREW THREAD SERIES DESIGNATOR | UNF | | SCREW THREAD DIAMETER | 0.216 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 28.0 | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.115 INCHES NOMINAL | | SHAFT LENGTH | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|