5905-01-006-7705 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-01-006-7708 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-01-006-7706

Federal Supply Class:
5905

National Item Identification Number:
010067706

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
2132071-819315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
2132071-855974HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER TEST SYSTEMS DIV
SA-6646A73138BI TECHNOLOGIES CORPORATION
SA664673138BI TECHNOLOGIES CORPORATION
SA6646A73138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION36.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER1.812 INCHES NOMINAL
BODY LENGTH2.000 INCHES NOMINAL
BODY STYLECYLINDRICAL BUSHING MOUNTED
FIXED TAP QUANTITY PER SECTION9 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
LATERAL RUNOUT0.003 INCHES
OVERALL DIAMETER2.157 INCHES MAXIMUM
OVERALL LENGTH2.937 INCHES NOMINAL
MAXIMUM RUNNING TORQUE3.00 INCH-OUNCES
MAXIMUM STARTING TORQUE3.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE LOCATIONAT 12 OCLOCK
NONTURN DEVICE RADIUS0.562 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.002 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS5.0 FREE AIR SINGLE SECTION
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND LOCATIONTERMINALS GOLD
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 NOMINAL
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SECTION QUANTITY1
SHAFT DIAMETER0.2497 INCHES NOMINAL
SHAFT END PLAY0.005 INCHES
SHAFT RADIAL PLAY0.003 INCHES
SHAFT RUNOUT0.0005 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.937 INCHES NOMINAL
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS3.6 SINGLE SECTION AND 7.2 SINGLE SECTION AND 10.8 SINGLE SECTION AND 14.4 SINGLE SECTION AND 18.0 SINGLE SECTION AND 21.6 SINGLE SECTION AND 25.2 SINGLE SECTION AND 28.8 SINGLE SECTION AND 32.4 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-180.0 TO 180.0 OHMS SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS+0.0 TO 130.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY12 TAB, SOLDER LUG
TEST DATA DOCUMENT19315-2132071 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us