5905-01-005-4945, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-01-005-4943 RESISTOR,VARIABLE,WIRE WOUND,PRE

5905-01-005-4946 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-005-4945

Federal Supply Class:
5905

National Item Identification Number:
010054945

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

2995143-12	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
50-1-11-503P	02111	VISHAY SPRAGUE INC
50-1-11-503P	C7407	IV-ELECTRONIC KLAUS VESPERMANN KG

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	6480.0 MINIMUM AND 10080.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	50.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM
BODY LENGTH	0.454 INCHES MINIMUM AND 0.484 INCHES MAXIMUM
BODY WIDTH	0.313 INCHES MINIMUM AND 0.343 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/BUSHING/SLOT MOUNTED
CUBIC MEASURE	0.072 CUBIC INCHES
FEATURES PROVIDED	HUMIDITY PROOF
FRAGILITY FACTOR	MODERATELY RUGGED
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING BUSHING LENGTH	0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
MOUNTING METHOD	STANDARD BUSHING AND UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	6480.0 MINIMUM AND 10080.0 MAXIMUM
SCREW THREAD SERIES DESIGNATOR	UNEF
SCREW THREAD DIAMETER	0.190 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
SECTION QUANTITY	1
SHAFT BEARING TYPE	SLEEVE
SHAFT DIAMETER	0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT LENGTH	0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIAL FEATURES	SEALED TO PERMIT CLEANING IN COMMON SOLVENTS
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATION	REAR END
TERMINAL TYPE AND QUANTITY	3 WIRE LEAD

Click here to Register for Free 30-day Trial