|
|
|
National Stock Number:
5905-01-004-9399
Federal Supply Class:
5905
National Item Identification Number:
010049399
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| J97964 | 01121 | ROCKWELL AUTOMATION, INC. | | SM-C-746958 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 295.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 0.828 INCHES NOMINAL | | BODY LENGTH | 1.094 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CUBIC MEASURE | 0.185 CUBIC INCHES | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | FEATURES PROVIDED | SWITCH | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 27.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 192.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | OPERATING POSITION | END OF ROTATION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0 TO 6.9 -55 DEG CELSIUS SINGLE SECTION AND +0.0 TO 3.8 -25 DEG CELSIUS SINGLE SECTION AND +0.0 TO 1.9 0 DEG CELSIUS SINGLE SECTION AND -2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND +0.0 TO 5.6 120 DEG CELSIUS SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 NOMINAL | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC/DC | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 117.0 | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80063-SM-C-746958 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|