5905-00-999-3804 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-00-999-3807 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-999-3805

Federal Supply Class:
5905

National Item Identification Number:
009993805

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
10652565-318876U S ARMY AVIATION AND MISSILE COMMAND
55-282-073138BI TECHNOLOGIES CORPORATION
719110-06605869RAYTHEON COMPANY
719110-6605869RAYTHEON COMPANY


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION7920.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION200.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.305 INCHES MINIMUM AND 0.364 INCHES MAXIMUM
BODY LENGTH1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM
BODY WIDTH0.270 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.300 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
OVERALL HEIGHT0.775 INCHES MINIMUM AND 0.894 INCHES MAXIMUM
OVERALL LENGTH1.270 INCHES MINIMUM AND 1.360 INCHES MAXIMUM
OVERALL WIDTH0.270 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
MOUNTING METHODTERMINAL AND UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.8 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG7920.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
SHAFT LENGTH0.040 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-250.0 TO 250.0 SINGLE SECTION
TERMINAL LENGTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us