5905-00-998-6985, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-00-998-6977 RESISTOR,FIXED,WIRE WOUND

National Stock Number:
5905-00-998-6985

Federal Supply Class:
5905

National Item Identification Number:
009986985

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

418283-22	96214	RAYTHEON COMPANY
MIL-R-22097/2	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ12CP101	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	6120.0 MINIMUM AND 9720.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	100.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.700 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL
MOUNTING METHOD	TERMINAL AND UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	6120.0 MINIMUM AND 9720.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT LENGTH	0.058 INCHES NOMINAL
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-250.0 TO 250.0 SINGLE SECTION
TERMINAL LENGTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial