5905-00-997-5470 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5930-00-997-5472 SWITCH,ROTARY

National Stock Number:
5905-00-997-5471

Federal Supply Class:
5905

National Item Identification Number:
009975471

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
260S1-100M80294BOURNS INSTRUMENTS INC


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION10.0 OHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
BODY LENGTH1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
BODY WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
BODY STYLERECTANGULAR W/BUSHING
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM
CONTACT ARM ELECTRICAL OFF POSITIONFULLY CW
FEATURES PROVIDEDNONMETALLIC SHAFT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT0.468 INCHES MINIMUM AND 0.532 INCHES MAXIMUM
OVERALL LENGTH1.280 INCHES MINIMUM AND 1.344 INCHES MAXIMUM
OVERALL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
MAXIMUM STARTING TORQUE7.50 INCH-OUNCES
MOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
MOUNTING FACILITY QUANTITY2
MOUNTING METHODSTANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNF
SCREW THREAD DIAMETER0.190 INCHES NOMINAL
SECTION QUANTITY1
SHAFT LENGTH0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
SHAFT DIAMETER0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial