|
|
|
National Stock Number:
5905-00-995-5172
Federal Supply Class:
5905
National Item Identification Number:
009955172
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 199-25K | 91637 | VISHAY DALE ELECTRONICS, LLC | | X900401-2 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 25.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 SINGLE SECTION | | BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | BODY WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | OVERALL HEIGHT | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | OVERALL LENGTH | 1.310 INCHES NOMINAL | | OVERALL WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 10.0 | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.087 INCHES MINIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 MAXIMUM | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT LENGTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 05257-X900401 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|