5820-00-995-2974 RECEIVING SET,RADIO Index 5910-00-995-2981 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5905-00-995-2975

Federal Supply Class:
5905

National Item Identification Number:
009952975

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
500-103502111VISHAY SPRAGUE INC
534858-164547HONEYWELL INTERNATIONAL, INC
534858-170210HONEYWELL INTERNATIONAL INC.
7223-65-073138BI TECHNOLOGIES CORPORATION


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3418.4 NOMINAL
ELECTRICAL RESISTANCE PER SECTION30.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER105.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
BODY DIAMETER0.875 INCHES MAXIMUM
BODY LENGTH1.610 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDNONMETALLIC SHAFT
FIXED TAP QUANTITY PER SECTION12 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.10 TO 0.10 SINGLE SECTION
LATERAL RUNOUT0.003 INCHES
MAXIMUM STARTING TORQUE0.60 INCH-OUNCES
MAXIMUM RUNNING TORQUE0.60 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.0015 INCHES
PILOT DIAMETER0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3500.0 MINIMUM
SECTION QUANTITY1
SHAFT BEARING TYPEBEARING
SHAFT END PLAY0.005 INCHES
SHAFT DIAMETER0.1248 INCHES NOMINAL
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
SHAFT LENGTH0.375 INCHES NOMINAL
UNDERCUT DIAMETER0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION449.8 SINGLE SECTION AND 717.7 SINGLE SECTION AND 989.5 SINGLE SECTION AND 1259.4 SINGLE SECTION AND 1529.3 SINGLE SECTION AND 1799.1 SINGLE SECTION AND 2069.0 SINGLE SECTION AND 2238.9 SINGLE SECTION AND 2608.8 SINGLE SECTION AND 2878.6 SINGLE SECTION AND 3148.5 SINGLE SECTION AND 3418.4 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-1.7 TO 1.7 OHMS ALL SECTIONS
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY15 TURRET


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us