5905-00-994-7230 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5905-00-994-7238 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-994-7233

Federal Supply Class:
5905

National Item Identification Number:
009947233

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
MIL-PRF-22097/281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-22097/281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ12CL10581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION6120.0 MINIMUM AND 9720.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION1.0 MEGOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BODY HEIGHT0.315 INCHES NOMINAL
BODY LENGTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
BODY WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.000 INCHES NOMINAL
OVERALL HEIGHT0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
OVERALL LENGTH1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
OVERALL WIDTH0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
MAXIMUM STARTING TORQUE8.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.75 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG6120.0 MINIMUM AND 9720.0 MAXIMUM
SECTION QUANTITY1
SHAFT LENGTH0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SHAFT DIAMETER0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SPECIFICATION/STANDARD DATA81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-250.0 TO 250.0 SINGLE SECTION
TERMINAL LENGTH6.000 INCHES MINIMUM
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 PIN
TEST DATA DOCUMENT81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us