5905-00-994-0322 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISIO Index 5910-00-994-0324 CAPACITOR,FIXED,METALLIZED,PAPER

National Stock Number:
5905-00-994-0323

Federal Supply Class:
5905

National Item Identification Number:
009940323

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
1055630419200US ARMY ARDEC RDECOM
22411-25380294BOURNS INSTRUMENTS INC
224L-1-25380294BOURNS INSTRUMENTS INC
224LI25332997BOURNS INC
3057L-1-25380294BOURNS INSTRUMENTS INC
B8209-1507639GE AVIATION SYSTEMS LLC


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION25.0 KILOHMS SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
BODY HEIGHT0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM
BODY LENGTH1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM
BODY WIDTH0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
OVERALL HEIGHT0.315 INCHES MINIMUM AND 0.325 INCHES MAXIMUM
OVERALL LENGTH1.290 INCHES MINIMUM AND 1.350 INCHES MAXIMUM
OVERALL WIDTH0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.083 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT LENGTH0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
SHAFT DIAMETER0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-70.0 TO 70.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY3 WIRE LEAD


Click here to Register for Free 30-day Trial