|
|
|
National Stock Number:
5905-00-992-5055
Federal Supply Class:
5905
National Item Identification Number:
009925055
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| 101982-181 | 06351 | MICROWAVE ENGINEERING CORPORATION | | 101982-181 | 99380 | SIERRA NETWORKS INC SIERRACOM DIV | | PH-10-1 750 OHMS 3% | 91637 | VISHAY DALE ELECTRONICS, LLC | | PH101-750R0H | 91637 | VISHAY DALE ELECTRONICS, LLC | | PH101750R0 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 750.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | HEAT SINK HEIGHT | 2.000 INCHES | | HEAT SINK THICKNESS | 0.040 INCHES | | HEAT SINK LENGTH | 6.000 INCHES | | HEAT SINK WIDTH | 4.000 INCHES | | INCLOSURE TYPE | ENCAPSULATED | | MATERIAL | ALUMINUM ALLOY HEAT SINK | | MOUNTING BUSHING DIAMETER | 0.375 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | POWER DISSIPATION RATING IN WATTS | 6.000 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -3.000 TO 3.000 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TERMINAL LENGTH | 0.312 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 82598-101982-181 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|